Hermle 2117  Quartz Ships Bell Clock movement

 The Ship's Bell strike sound is as Authentic as our Hermle mechanical strike bell clocks and at a great price. Hermle's new design uses speaker with volume adjustments and night shut off. Overall Movement size: 4" L x 2.1/4" W X 1.1/8" without speaker added -Total Height with Speaker is 1.3/4" and has 6" wire leads to set where you need it. The speaker can also set directly on top the movement if needed.   Works off two C cell batteries.  Direct from Germany

Excellent Choice for Hermle Ships Bell Clocks, Schatz Ships Bell Clocks, Howard Miller Ships Bell Clocks, Weems & Plath Ships Bell Clocks and Chelsea Ship Bell Clocks.

 The ship's bell strikes in 30 minute increments over a 4 hour "watch" period. There is one nautical bell strike for each 30 minute segment beginning with a single nautical bell strike at half past midnight and counting up to 8 bell strikes at 4:00 a.m. marking the end of the 4 hour watch period. At this point the bell strike pattern begins again at a single strike at 4:30 and counts up to 8 strikes to 8:00. The cycle is continuous over the 24 hour shift watch period. Nautical Bell Schedule: •12:00, 4:00, 8:00 =8 bell strikes •12:30, 4:30, 8:30 =1 bell strike •1:00, 5:00, 9:00 =2 bell strikes •1:30, 5:30, 9:30 =3 bell strikes •.... continues counting up to 8 bell strikes. Please allow 24 hours for your bell strike schedule to synchronize itself when C-Cell batteries are installed and clock is set.

Bell Clock Movement Size: 4.3/8" L x 2.1/4" W X 1.1/8" Height with attached Speaker: 1.3/4"

Please Note: Measure Inner Clock Case to ensure clearance between clock cavity and bezel enclosure.

Hand Shaft Dia. 3/16"

Hand Shaft Lenght: 5/8" - Holds up to a 1/4' Dial inThickness.

Warranty: Three Years